选择特殊符号
选择搜索类型
请输入搜索
I Insulation
Generator Stator Bar Deterioration Due to Vibration Sparking and Partial Discharge
The Development of Insulation Materials in Harbin Electric Machinery Company Limited
Comprehensive Risk Evaluation for Chemical Materials Applied to a Turbine Generator, and the Compreh ensive Chemical Risk Comparison between Different Generators
Detect and Evaluation of Corona Defects on Generator Stator Winding Overhangs
Design and Acceptance Test of 23kV Stator Bars for the Largest Air Cooled Hydro Generator in Xiang Jia Ba Right Bank
Thermal Cycle Testing for Large Air-Cooled Hydrogenerator Stator Bars
Key Points of On-site Operation and Interpretation of Off-line Partial Discharge Test on Generator Stator Windings
Ⅱ Hydroelectric Generators
Recent Technologies for Hydro Generators and Generator-Motors
Development of Air-cooled Hydrogenerators for 700MW Level Capacity
Optimization and Improvement on Vibration & Noise Performance of Unit 15-18 for the Right Bank Power Station of TGP
Methods for Fixation of the Rotor Winding Overhang of Large Asynchronous Hydrogenerators
Inter-turn Short Circuit of Field Winding in Synchronous Machines
Simulation Test and Research on Evaporative Cooling of Hydraulic Generator for TGP Underground Power Plant
Thermal Analysis of Large Hydro-Generator Based on a Multi-physic Approach
Selection of Cooling Mode for Giant Hydro-generator
Research on Transposition Methods of the Stator Bars for Huge Hydro-generator
Ⅲ Turbogenerators
Experience with Turbine Generator Life Cycle Management Process
Temperature of Turbo-generator Stator Strands
The Developing Road of HEC Turbine Generator
Calculation of Electric Field and Structure Design of Semi-conduction Layer for Stator Bar of 1000MW Turbo-generator
Nonlinearity of Torsional Damping and its Effect on SSR Characteristics of Turbine Generators
Sensitive Analysis on Electrical Parameters of Generators to Sub-synchronous Resonance
Resistance Analysis on the Gap-pickup Diagonal Flow Passage in Turbine Generator Rotors
Negative Sequence Eddy Current Field Analysis and Temperature Calculations of 1100MW Turbo-generator with 3D Finite Element Methods
Study and Application of Mitigation and Protection Technology To SSR/SSO
Test Analysis of 600MW Generator Stator Bar Temperature Measure
Study on Internal Cooling Water Quality and Coils Corrosion of Large Generators
Technical Characteristics of l l00MW Nuclear Power Generator Designed by Shanghai Generator Works
Refurbishment Model of Turbine Generator in Nuclear Power Plant
IV Large Motors
Study on Electromagnetic Design of Special Brushless Exciter Used for Synchronous Motors
Asymmetry of Windings Inductance in High-Torque Low-Speed Multi-Unit Permanent Magnet Synchronous Motor
V Wind Generators
Overview of Permanent Magnet Wind Generators in China
2G HTS Wind Turbin Generators
Brushless Excitation System 2G HTS Wind Turbine Generator Based on Topological Generator (Flux PUPM)
The Development of 5MW Off-shore Direct-drive Wind Turbine Generator
Development of Permanent Magnet Wind Generators with Fractional Slot Concentrated Winding.
Modelling and Simulation of Direct-coupled Permanent Magnet Wind Generators System with Maximum
Power Point Tracking Control Using Simplorer
Research on Low-voltage Ride-through Technology of grid-connected Doubly-Fed Wind Power Generation System
Study on Maximum Power Point Tracking Control for Switched Reluctance Generator Used in Wind Power Generation
Design and Research of 10MW Large Wind Turbine Generator
VI Operation and Monitoring
Guide for On-line Monitoring of Turbo-generators
Detailed On-Site Measurements to Validate Generator Numerical Modeling
Study of Quasi-synchronization Grid Connected 1000MW Hydro-generator
Experience with Acoustic Emission Monitoring of Stator Winding Delaminations During Thermal Cycling Testing
A Novel Online Diagnosing Technique of Turn-to-Turn Short Circuit of Large Turbine Generator
Online PD Monitoring System with Microstrip Antenna for Rotating Machines
Necessity and Impendency of Online Monitoring the Vibration of 800MW Generator Stator End Winding in Suizhong Power Plant
Impact of Auxiliaries Response on the Voltage Ride Through Capability of Synchronous Generator Power Plants
The Conditional Diagrams Between the Electric Generator and the Electric Grid to Which it is Connected
Study on Asynchronous Self-excitation and Its Protection Measures in Generator
The Simulation and Discussion on SSR of TCSC Transmission System in a Power Station
Effect of Automatic Reclosing on the Torsional Fatigue Life Expenditure of Turbine-Generator Shafts
Methods for Inter Coil Short Circuit Detection in Excitation Winding Coils of Turbo Generator in Operation and in Standstill Condition2100433B
精装: 422页
正文语种: 英语
开本: 16
ISBN: 9787538867657, 7538867651
条形码: 9787538867657
尺寸: 29.2 x 21.6 x 2.6 cm
重量: 1.9 Kg
作者:编者:(巴西)艾瑞力 孙玉田
重庆举办的氯碱产业新形势、新发展交流研讨会主要讲什么内容啊?
刚在活动0家上查了下,这次会议主要内容如下: 会议部分内容: 1、新常态下、氯碱化工与制造业企业应如何调整发展心态、适应新形势 2、氯碱行业“十三五”规划下如何优化产业结构调整 3、园区一体化节能环保...
技术开发体系初步形成,高新技术装备与研发能力显著提升,技术 创新水平跃上了新的台阶。以落实科学发展观,把增强自主创新能 力,加快产业发展作为企业发展的战略基点,加快技术转型升级, 加速产品结构调整,实...
简单的说一下,都是利用通电绕组产生旋转磁场,来旋转的 也许你会说磁场旋转转子为什么会转 你拿两块磁铁让他们马上就要吸在一起却留一点点缝,然后使一个旋转看...
“球墨铸铁技术新发展”研讨会征文通知
为进一步推动我国球墨铸铁科研与生产技术的发展,交流研讨我国在球墨铸铁领域所取得的成绩和存在的问题,拟在2007中国铸造活动周期间召开“球墨铸铁技术新发展”研讨会,现开始征文,欢迎各位专家积极投稿并参与研讨。主办单位:中国机械工程学会铸造分会、中国机械工程学会铸造分会铸铁及熔炼技术委员会、铸造杂志社、现代铸铁编辑部会议时间:2007年10月会议地点:武汉征文内容:我国球墨铸铁发展综述;球墨铸铁的应用技术及发展趋势;球化理论及其发展;球铁的成分及性能论述;球
旋转电机的定义
长沙宏力水泵出品 :http://www.honglipump.com 旋转电机 (以下简称 电机 )是依靠电磁感应原理而运行的旋转电磁机 械,用于实现机械能和电能的相互转换。 发电机从机械系统吸收机械 功率,向电系统输出电功率;电动机从电系统吸收电功率,向机械系 统输出机械功率。 电机运行原理基于电磁感应定律和电磁力定律。 电机进行能量转换 时,应具备能作相对运动的两大部件:建立励磁磁场的部件,感生电 动势并流过工作电流的被感应部件。 这两个部件中,静止的称为定子, 作旋转运动的称为转子。定、转子之间有空气隙,以便转子旋转。 电磁转矩由气隙中励磁磁场与被感应部件中电流所建立的磁场 相互作用产生。 通过电磁转矩的作用, 发电机从机械系统吸收机械功 率,电动机向机械系统输出机械功率。 建立上述两个磁场的方式不同, 形成不同种类的 电机。例如两个磁场均由直流电流产生, 则形成直流 电机;两个
《2005国际房地产估价学术研讨会论文集》是中国建筑工业出版社出版的论文集,中国房地产估价师与房地产经纪人学会编。
2005国际房地产估价学术研讨会论文集
拼音题名
2005 guo ji fang di chan gu jia xue shu yan tao hui lun wen ji
其它题名
并列题名
ISBN
7-112-08107-6
责任者
中国房地产估价师与房地产经纪人学会编
出版者
中国建筑工业出版社
出版地
北京
出版时间
2006
中图分类号
F293.35-53
附注
摘要
本文集收录130余篇论文,主要围绕房地产估价师的社会责任、拆迁补偿估价与社会稳定、抵押估价与金融风险、损害赔偿估价与社会正义、课税估价与社会公平,以及房地产估价机构的治理、业务拓展等问题,展开了广泛深入的研讨。
《第十一届结构工程国际研讨会论文集(英文版)(套装上下册)》是由崔杰、冯新、季平茹、金广腾编写,全书共分上下两册,主要收录了“第十一届诉讼结构工程国际研讨会”上的论文百余篇,具体内容包括《Structural Analysis》《FEM Analysis for Stiffness of Hollow Spherical Joints with Rib Stiffeners》《Seismic response Analysis for UHVDC Air Type Smoothing Reactors》《Energy Dissipation at Extemal Diaphragm Connection of 3D Steel Frames Used CHS Column and H-Shaped Beam under Cyclic Loading》等。
《建筑学专业硕士研究生教学与培养国际学术研讨会论文集》“全国建筑学专业指导委员会”与南京大学建筑学院合作主办了这次“建筑学专业硕士研究生教学与培养国际学术研讨会”,旨在对当今中国的建筑学专业硕士研究生教学中的相关问题展开学术研讨。会议内容围绕“硕士研究生培养计划”、“社会需要与人才培养”、“理论教学与建筑实践”以及“设计论文”四个主题展开。《建筑学专业硕士研究生教学与培养国际学术研讨会论文集》为此次会议研究成果的论文集结,以供更大的读者群体之了解。