1、对于点的间距排列大小合适，而又有规则的点，我们就要选择拉焊的焊接类型，此时我们一般选择R(刀型)或是D类型的烙铁头进行焊接的。在使用R类型的烙铁头时，一般是倾斜的，有一定的角度，而不是直上直下的;而使用D类型的烙铁头进行拉焊的时候，一般是直上直下的。

1, for the point spacing, arrangement, size, and regular points, we have to choose the type of pull welding, at this time we usually choose R (knife type) or D type soldering iron head for welding. In the iron head using R type, is generally inclined, there is a certain angle, rather than straight up and down; and the iron head using the D type of welding pull, is generally straight.

2、对于焊接FPC软板之类的产品，宜选择PC或是FPR类型的烙铁头，总之烙铁头的形状是有很多种的，一般的原则就是焊接什么产品就选择什么类型的烙铁头的，否则很容易造成焊点不良率的上升的。

2, for the welding of FPC soft board like products, should choose PC or FPR type iron head, the iron head is the shape of many kinds, the general principle is to choose what product welding tip what type, it is very easy to cause the solder joint defect rate rise.

3、对于点的间距比较大，或是排列无规则的焊点来说，我们一般是进行一个点一个点的单点焊接的，也就是所谓的点焊，适合这类的烙铁头的型号一般为D或是DV类型的，尤其是像电表类插件比较多的，都是倾向于选择这种类型的烙铁头。

3, for the distance between points is relatively large, or irregular arrangement of solder joints, we are generally single point a point a point welding, also known as spot welding, suitable for welding head of this kind of type is generally D or DV type, especially as plug-in class than meter more, are inclined to choose this type of iron head.

以上就是焊锡机厂家为大家介绍的自动焊锡机烙铁头选型依据的介绍，希望对大家有帮助，深圳市创盈时代科技是荣获国家高新技术企业称号的自动焊锡机厂家，专注于双Y双头焊锡机、双头三头焊锡机、三轴四轴焊锡机、激光焊锡设备整体解决方案领导者，为你提供整体点胶解方案，欢迎来电咨询。

原文地址：http://www.chytime.com/news/hxjs/1667.html

本文关键字：自动焊锡机烙铁头