应用介绍

这火应用计算两个估计需要火流必须扑灭结构火灾以及计算泵出口压力为各种手线和主流在两个标准和公制。 应用程序是由司机/运营商中会用到的应急响应或前期规划应用的计算来帮助控制火灾事件发生时,地面。 国家消防学院公式和爱荷华州立公式可以用来生成估计必要消防流量。这两个方法给不同的总GPMs(LPMs),但是机会击倒和抑制的努力有效增加当所需的火流计算和预先确定的。 泵出口压力计算器估计泵面板排放压力测量所需各种软管配置在两个Psi和kPa使用简单的投入,如喷嘴类型、软管直径、软管长度,设备摩擦损失和高程。这个公式是PDP = NP FL AFL 厄尔。 警告:此应用程序需要不负责它产生的结果。虽然计算已经彻底测试和引用,使用结果谨慎——理解的情况千差万别,从情况情况。这些计算应该只是用作另一个工具的工具箱。 This fire application calculates both estimated needed fire flow required to extinguish a structure fire as well as calculate pump discharge pressures for various hand-lines and master streams in both standard and metric terms. The application is designed by driver / operators to be used during emergency response or pre-planning to apply calculations to help control the fire ground incident when it occurs. The National Fire Academy formula and the Iowa State formula can be used to generate the estimated necessary fire flow. These two methods give different total GPMs (LPMs), but the chances for effective knockdown and suppression efforts are increased when the needed fire flow is calculated and pre-determined. The pump discharge pressure calculator estimates the pump panel discharge pressure needed for various hose configurations measured in both Psi and kPa using simple inputs such as nozzle type, hose diameter, hose length, appliance friction loss and elevation. The formula used is PDP = NP FL AFL EL. WARNING: This app takes no responsibility for the results it produces. Although the calculations have been thoroughly tested and referenced, use the results with caution - understanding that circumstances vary from situation to situation. These calculations should simply be used as another tool in the toolbox.