简介
锥柱手柄，标准为JB/T 7270.7-1994
标记示例
A型，d=6，L=50，35钢，喷砂镀铬锥柱手柄，标记为:手柄6x50 JB/T 7270.7
d | d1 | s | L | SD | D1 | D2 | d2 | H | h | SR | 每件质量/Kg | ||
基本尺寸 | 极限偏差H8 | 基本尺寸 | 极限偏差H13 | ||||||||||
5 | +0.018 0 | M5 | 40 | 12 | 7 | 5 | 2 | 9 | 4.5 | 10 | 0.013 | ||
6 | M6 | 5 | +0.18 0 | 50 | 14 | 8 | 10 | 5 | 0.021 | ||||
8 | +0.022 0 | M8 | 5.5 | 63 | 16 | 10 | 6 | 3 | 11 | 12 | 0.037 | ||
10 | M10 | 7 | +0.22 0 | 80 | 20 | 12 | 8 | 14 | 6.5 | 16 | 0.068 | ||
12 | +0.027 0 | M12 | 8 | 10 | 26 | 15 | 10 | 4 | 18 | 8.5 | 20 | 0.127 | |
16 | M16 | 10 | 125 | 32 | 18 | 12 | 5 | 22 | 10 | 25 | 0.252 | ||
20 | +0.033 0 | M20 | 13 | +0.27 0 | 160 | 40 | 22 | 16 | 6 | 28 | 13 | 32 | 0.447 |
25 | M24 | 18 | 200 | 50 | 28 | 18 | 8 | 36 | 17 | 40 | 0.856 | ||
