序
前言
第一篇 王仲仁教授的学术论文文选
塑性理论
20世纪80年代初期中国的固体强度理论在金属塑性成形中的重要应用成果
试论塑性加工的实质是"力处理"
论塑性加工中应变应力顺序对应规律--兼评古布金的最小阻力定律
论应力偏量及应力张量第三不变量的物理意义及其在主应力空间中的几何意义
广义屈服准则
一点的三维剪应力图及其与金属变形类型的对应关系
主剪应力法及其在锥模薄管拉拔与缩颈中的应用
内压椭球壳塑性变形的发生部位与扩展过程分析
三向应力Mohr圆的真实构成及剪应力作用方向的确定
偏应力张量第二及第三不变量在塑性加工中的作用
Hencky应力方程与主剪应力迹线上正应力方程的比较
三维最大剪应力迹线上的正应力变化规律
板料变形受压失稳临界条件分析
用嵌入螺柱法研究金属塑性应变分布
A Consistent Relationship Between the Stress-and Strain-components and its Application for Analyzing the Plane-stress Forming Process
A New Method to Prove the Rule of Change of Normal Stress Along a Slip Line
Principal Shearing Stress Locus Theory of Axisymmetrically Plastic Flow
The Application of Strength Theories and Yield-criteria in Engineering
The Method of the Principal Shear Stress Tracing Line and its Application in the Flaring and Expanding of a Thin-walled Tube with a Conical Punch
Three-dimensional Representation of Normal Stress Magnitude with Applications to Hydrobulge Forming
Multiple-factor Dependence of the Yielding Behavior to Isotropic Ductile Materials
Graphical Methods of Representing the Stress Components on Dif{erent Inclined Planes at One Point
Comprehensive Analysis of Stress-Strain in Typical Metal Forming Processes
液力成形
椭球壳体液压成形的塑性变形规律的研究
无模胀球的原理与研究进展
单曲率多面壳体液压胀球工艺
应力莫尔圆变化分析及其在典型液力塑性成形中的应用
内高压成形起皱行为的研究
Experimental Research and Finite-element Simulation of Plates Hydrobulging in Pairs
Progress in Shell Hydroforming
Numerical Simulation of Plastic Deformation of Pressurized Oblate Spheroid Inscribed Single-Curvature Shells
Theoretical Analysis and Experimental Research into the Integral Hydro-bulge Forming of Oblate Shells
Hydroforming of Typical Hollow Components
The Integrally Hydro-forming Process of Pipe Elbows
Safety Analysis of 200m3 LPG Spherical Tank Manufactured by the Dieless Hydroulging Technology
Research on the Integral Hydrobulge Forming of Ellipsoidal Shells
Research into the Dieless Hydro-forming of Nonuniform Thickness Spherical Vessels
Experiment and Numerical Simulation of Hydro-forming Toroidal Shells with Different Initial Structure
Analysis of the Internal Pressure in Tube Hydroforming and Its Experimental Investigation
Effect of the Initial Structure on the Hydro-forming of Toroidal Shells
新成形技术
多点"三明治"成形及其在风洞收缩段形体制造中的应用
板材数控增量成形过程的研究
粘性介质压力成形的应用研究
管件电磁成形研究
等径侧向挤压应变分析
Al-Li2091合金超塑成形/扩散连接工艺研究
钛合金半球件超塑成形的数值模拟与实验研究
用大尺寸粉末颗粒材料制备PM-SiCp/LYl2及其超塑性研究
静液压力下7075铝合金圆环压缩试验研究
曲轴RR法镦锻成形的数值模拟与缺陷预测
胀形法加工聚碳酸酯板材制品的工艺参数研究
马鞍形板材件多点"三明治"成形实验研究
Multi Point Sandwich Forming
Spinning Conical Workpiece without Mandrel
Analysis of Blanking Vibration with Consideration of the Break-through State
Research into the Properties and Microstructure of ZA13 Alloy Tubes Formed by Liquid Extrusion
……
第二篇 业内专家对王仲仁教授学术贡献的评价
第三篇 王仲仁创新与创业、科学研究及教书育人等方面的部分文章
第四篇 王仲仁教授相关报道
第五篇 附录
