Foreword
1 Scope
2 Normative References
3 Terms and Definitions
4 General
5 Bitumen
5.1 Sampling
5.2 Preparation
5.3 Density Test
5.4 Penetration Test
5.5 Ductility Test
5.6 Softening Point Test （Ring-and-baU Apparatus）
5.7 Solubility Test
5.8 Thin-film Oven Test
5.9 Flash Point and Fire Point Test （Cleveland Open Cup Method）
5.10 Breaking Point Test （Fraass Method）
5.11 Moisture Content Test
5.12 Test of Bitumen Paraffin Content （Distillation Test）
5.13 Residue Content Test of Emulsified Bitumen by Evaporation
5.14 Ionic Particle Charge Test of Emulsified Bitumen
5.15 Adhesion Test of Emulsified Bitumen and Aggregate
5.16 Storage Stability Test of Emulsified Bitumen
5.17 Demulsibility Test of Emulsified Bitumen
6 Filler
6.1 Filler Sampling
6.2 Sieve Analysis of Filler
6.3 Density Test of Filler
6.4 Moisture Content Test of Filler
6.5 Hydrophilic Coefficient Test of Filler
7 Fine Aggregate
7.1 Gradation Test
7.2 Apparent Density and Absorption Test
7.3 Moisture Content Test
7.4 Mud Content Test
7.5 Soundness Test （Sodium Sulfate Method）
7.6 Soundness Test （Crushing Method）
7.7 Organic Impurities Content Test
7.8 Water Stability Test
8 Coarse Aggregate
8.1 Grain Grading Test
8.2 Apparent Density and Water Absorption Test
8.3 Moisture Content Test
8.4 Mud Content Test
8.5 Clay Lump Content Test
8.6 Elongated and Flat Grain Content Test
8.7 Crush Ratio Test
8.8 Soundness Test
8.9 Adhesion Test of Coarse Aggregate and Bitumen
8.10 Alkalinity Test of Aggregate
9 Bitumen Concrete
9.1 Preparation and Field Sampling of Bitumen Mixture
9.2 Preparing the Marshall Specimen for Bituminous Concrete
9.3 Maximum Density Test
9.4 Density Test
9.5 Quantitative Extraction Test
9.6 Marshall Stability and Flow Value Test
9.7 Slope Flow ValueTest
9.8 Seepage Test
9.9 Uniaxial Compression Test
9.10 Hydraulic Stability Test
9.11 Thermal Stability Test
9.12 Tensile Test
9.13 Bending Test of Small Beam
9.14 Static Triaxial Compressive Test
9.15 Dynamic Triaxial Compressive Test
9.16 Creep Test
9.17 Stress Relaxation Test
9.18 Fatigue Test
9.19 Rheological Test
9.20 Linear Expansion Coefficient
9.21 Specific Heat Test
9.22 Temperature Conductivity Test
9.23 Thermal Conductivity Test
9.24 Freezing Test
9.25 Bonding Tests of Bituminous Concrete and Cement Concrete
9.26 Nondestructive Permeability Test
